*Periodic shift work is required*

ESSENTIAL JOB FUNCTIONS:  Responsibilities will include, but are not limited to:

• Troubleshoot, repair, and maintain solar power systems to the component level, applying electronics principles to diagnose malfunctions and restore equipment to optimal operation.
• Perform preventive and corrective maintenance on the following primary systems: 
  • Photovoltaic Arrays: IronRidge Ground Mount Racking System with Jinko Solar JKM435M-72HLM-TV 435W bifacial modules.
  • Energy Storage: SuperCap Energy SCE48V7460EMR23 48VDC, 7.46 kWh supercapacitor modules.
  • Power Management: Vertiv 7100-Series DC Power Plant, including rectifiers, solar control modules, 1M830DNA NCU Controller, and eSure modules. O
  • Inverters: Wilmore Electronics 1747-48-115-60 2.2 kVA DC-to-AC inverters. o Backup Power: Two (2) 30 kW Kohler LP-fired generators with Automatic Transfer Switch (ATS) and three (3) 1000-gallon LP fuel tanks.
  • Protection: MidNite Solar Surge Protection Devices (MNSPD).
• Conduct performance testing, system verification, and component-level repairs using digital multimeters, soldering tools, power supplies, battery testers, and associated hand tools.
• Perform Target Battery testing and assist with related equipment support as needed.
• Maintain detailed records of maintenance actions, parts consumption, and system performance.
• Safely lift and carry up to 50 lbs, stoop, bend, and work in extreme heat and cold outdoor field environments. 
• Provide surge support to other technical teams (e.g., MILES/TESS) when required.
• Travel to remote sites via helicopter as necessary.
• Perform all other duties assigned by the Site Manager.

QUALIFICATIONS:

• U.S. Citizen (required)
• 3+ years of hands-on experience performing PMCS (Preventive Maintenance Checks and Services) and sustaining solar array/power systems. Solar Service Technician II (1 positions available)
• Strong experience maintaining solar photovoltaic systems, energy storage solutions, charge controllers, inverters, and generator backup systems in a fully mission-capable condition.
• In-depth knowledge of electronics and the ability to troubleshoot circuits down to the component level.
• Proficient with tools and test equipment, including Digital Multimeters, soldering irons, power supplies, and battery testers.
• Demonstrated ability in time management, problem-solving, attention to detail, and working independently or in a team environment.
• Strong oral and written communication skills.
• Experience with Microsoft Office Suit

PREFERRED SKILLS:

• Military background or familiarity with military command and control structures.
• Possess a working knowledge of the organizational interface of military, federal, state, and local agencies.

SECURITY CLEARANCE: Ability to obtain and maintain ACTIVE DOD Secret Clearance.

LOCATION: Ft. Irwin, CA (On-Site)

* MUST FILL OUT THE ENTIRE QUESTIONNAIRE TO BE CONSIDERED FOR THE POSITION *

ESSENTIAL JOB FUNCTIONS:  Responsibilities will include, but are not limited to:

• Provide technical guidance as well as after-action reports following field experimentation.
• Repair and maintain structural, electronic control systems, and subassemblies of prototype UAS, commercial off-the-shelf[TH1]   COTS UAS platforms, and various other system types, including military UAS.
• Perform balance and flight-check for approving UAS for return-to-service.
• Conduct UAS flight operations to include basic associated equipment operation, mission planning, image capture and transmission, GPS navigation, and air space management.
• Maintain current UAS inventory organization.
• Other duties as assigned.

QUALIFICATIONS:

• 5+ years’ experience with remote control aircraft, prototype UAS, commercial off-the-shelf UAS platforms, and various other system types, including military UAS.
• 3+ years’ electrical (avionics) integration, material fabrication with extensive knowledge of Mission Planner and various other COTS ground control software.
• Possess or have the ability to obtain an FAA Part 107 license.
• Experience with one or more of the following: military systems, computer systems, GPS, RF video transmission technology and techniques, aviation, airspace management, aerodynamics, map reading, remote controlled systems, electronics, Mission Planner, and model aviation.
• Ability to maintain personal flight logs and flight certification documentation.
• Knowledge of related mechanical assemblies to include actuators, servos, electric motors, and their wiring components.
• Knowledge of electronic/gas R/C systems and subassemblies.
• Knowledge of composite materials like Kevlar, fiberglass, carbon fiber and their appropriate use as it pertains to UAS manufacturing.
• Microsoft Office Suite, especially Word and Excel knowledge.
• Ability to communicate effectively in a fast-paced field environment and office environment, both orally and in writing.
• Emphasis on field safety for all operationally involved personnel, not just flight crew-specific.
• Demonstrated initiative, self-motivation, eagerness to learn, and attention-to-detail.

 Additional requirements:

• Travel both CONUS and OCONUS is required up to 40% (Approximately 6 to 10 trips per year, with each trip lasting 10 to 14 days).
• Employment is contingent upon successfully obtaining a United States Passport within six months of the hire date.

PREFERRED SKILLS:

• Balsa wood fabrication.
• Adhesive familiarization.
• Familiarization of common shop tools (wrenches, drivers, dremels, etc.).
• Knowledge of machining a plus.
• Military background or familiarity with military command and control structures.
• Possess a working knowledge of the organizational interface of military, federal, state, and local agencies.
• Demonstrate time management, problem-solving skills, self-motivation, eagerness to learn, and attention to detail.
• Ability to efficiently react to shifting program requirements and work in a team environment.
• Effectively communicate, both orally and in writing.

SECURITY CLEARANCE:  Must be able to obtain and maintain a DOD Secret security clearance.

  *The selected applicant will be subject to a government security investigation

    and must meet eligibility requirements for access to classified information. *

LOCATION: Tampa, FL *Must be local or willing to relocate*

* MUST FILL OUT THE ENTIRE QUESTIONNAIRE TO BE CONSIDERED FOR THE POSITION *

 *This is a bench (on-call, as-needed) position that will be compensated as a 1099 independent contractor*

ESSENTIAL JOB FUNCTIONS:  Responsibilities will include, but are not limited to:

• Operate both fixed-wing and multirotor UAS (Preferred experience with groups 1, 2, 3, and turbine) in support of customer experimentation utilizing common command & control (C2) methods as well as remote-control systems and their operation.
• Provide technical guidance as well as after-action reports following field experimentation.
• Repair and maintain structural, electronic control systems, and subassemblies of prototype UAS, commercial off-the-shelf UAS platforms, and various other system types, including military UAS.
• Perform balance and flight-check for approving UAS for return-to-service.
• Conduct UAS flight operations to include basic associated equipment operation, mission planning, image capture and transmission, GPS navigation, and air space management.
• Maintain current UAS inventory organization.
• Other duties as assigned.

QUALIFICATIONS:

• High School Diploma and a minimum of five (5) years’ experience with remote control aircraft, prototype UAS, commercial off-the-shelf UAS platforms, and various other system types, including military UAS.
• Possess or have the ability to obtain an FAA Part 107 license.
• Experience with one or more of the following: military systems, computer systems, GPS, RF video transmission technology and techniques, aviation, airspace management, aerodynamics, map reading, remote controlled systems, electronics, Mission Planner, and model aviation.
• Ability to maintain personal flight logs and flight certification documentation.
• Knowledge of related mechanical assemblies to include actuators, servos, electric motors, and their wiring components.
• Knowledge of electronic/gas R/C systems and subassemblies.
• Knowledge of composite materials like Kevlar, fiberglass, carbon fiber and their appropriate use as it pertains to UAS manufacturing.
• Proficiency using Microsoft Office Suite, especially Word and Excel.
• Ability to communicate effectively in a fast-paced field environment and office environment, both orally and in writing.
• Emphasis on field safety for all operationally involved personnel, not just flight crew-specific.
• Demonstrated initiative, self-motivation, eagerness to learn, and attention-to-detail.

Additional requirements:

• This is a bench (on-call, as-needed) position that will be compensated as a 1099 independent contractor.

• Travel both CONUS and OCUNUS is required up to 40% (Approximately 6 to 10 trips per year, with each trip lasting 10 to 14 days).
• Employment is contingent upon successfully obtaining a United States Passport within six months of the hire date.

PREFERRED SKILLS:

• Balsa wood fabrication.
• Adhesive familiarization.
• Familiarization of common shop tools (wrenches, drivers, dremels, etc.).
• Knowledge of machining a plus.
• Military background or familiarity with military command and control structures.
• Possess a working knowledge of the organizational interface of military, federal, state, and local agencies. 
• Demonstrate time management, problem-solving skills, self-motivation, eagerness to learn, and attention to detail.
• Ability to efficiently react to shifting program requirements and work in a team environment.
• Effectively communicate, both orally and in writing.

SECURITY CLEARANCE:  Must be able to obtain and maintain a DOD Secret security clearance.

  *Will be subject to a government security investigation

    and must meet eligibility requirements for access to classified information*

LOCATION: Tampa, FL

* MUST FILL OUT THE ENTIRE QUESTIONNAIRE TO BE CONSIDERED FOR THE POSITION *

Travel is a requirement (approximately 20-30%).

ESSENTIAL JOB FUNCTIONS: 

• Work with electrical and mechanical engineers to build, test, and deploy products for customers.
• Work with software developers to deploy integrated products and solutions.
• Develop integration plans and strategies for sensors to include Unmanned Systems and Drones into military systems.
• Participate in field experimentation, testing and troubleshooting of various types of electronics and mechanical systems.
• Travel to government sites and support field experimentation.
• Work with project managers on production efforts to ensure that projects are completed satisfactorily, on time, and within budget.
• Collaborate with engineering and other support personnel to identify improvements to equipment, processes, and overall productivity.
• Work with Project Managers on production efforts to ensure that projects are completed satisfactorily, on time, and within budget.
• Continually develop skills and knowledge of the engineering technologies in place, as well as staying informed on new developments in engineering technology.
• Perform special projects of an urgent and sensitive nature and other duties as assigned.

QUALIFICATIONS:

• Bachelor’s degree from an accredited college or university in Mechanical Engineering, Systems Engineering, or a STEM discipline.
• 2+ years’ experience in Mechanical Engineer and/or System Engineer.
• Knowledge of application transport and network infrastructure protocols.
• Basic understanding of Window and Linux Operating Systems.
• Understanding of basic network principles.
• Experience with soldering.

PREFERRED SKILLS:

• Military background or familiarity with military command and control structures.
• Possess a working knowledge of the organizational interface of military, federal, state, and local agencies. 
• Demonstrate time management, problem-solving skills, self-motivation, eagerness to learn, and attention to detail.
• Ability to efficiently react to shifting program requirements and work in a team environment.
• Effectively communicate, both orally and in writing.

SECURITY CLEARANCE:  Must be able to obtain and maintain a Secret security clearance.

LOCATION:  This is a full-time position, located in Tampa, FL. 

* MUST FILL OUT THE ENTIRE QUESTIONNAIRE TO BE CONSIDERED FOR THE POSITION *

*Anticipate travel 20%*

ESSENTIAL JOB FUNCTIONS:  Responsibilities will include, but are not limited to:

• Set up, operate, and troubleshoot HAAS CNC mills with HAAS controllers to produce parts in accordance with engineering drawings, routers, and machining specifications.
• Perform CNC milling operations for production and prototype work, including use of existing 3-axis and 4-axis programs and development of new programs as needed.
• Create, edit, and optimize CNC programs using Mastercam; apply working knowledge of G-code programming to support machining operations.
• Review and interpret blueprints, engineering drawings, job routers, and work instructions to determine machining requirements, tolerances, and sequence of operations.
• Select and use appropriate cutting tools, fixtures, materials, and machining methods for efficient and accurate production.
• Inspect parts during and after machining using precision measuring instruments such as micrometers, calipers, and other gauges to verify compliance with print specifications.
• Make necessary machine offsets and process adjustments to maintain dimensional accuracy and quality requirements.
• Perform related secondary operations on parts produced, including sawing, polishing, and deburring.
• Complete prototype and short-run machining jobs with minimal supervision, including independent setup and operation where required.
• Support occasional manual machining operations, including manual lathe work, as needed.
• Conduct routine machine cleanup, daily maintenance, and general housekeeping to maintain a safe, organized, and efficient work area.
• Coordinate effectively with internal departments such as engineering, programming, tool room, purchasing, quality control, deburring, and shipping to support production flow and job completion.
• Follow all company safety, quality, and production standards and maintain accountability for the accuracy and quality of own work.

QUALIFICATIONS:

• Minimum 5 to 10 years of experience in CNC machining and manual machining operations.
• Demonstrated proficiency in setting up and operating HAAS CNC mills with HAAS controllers.
• Strong experience with Mastercam programming and solid working knowledge of G-codes.
• Ability to write, edit, and run CNC programs for new and existing production and prototype jobs.
• Experience working with 3-axis and 4-axis machining programs.
• SolidWorks programming experience is preferred.
• Strong knowledge of cutting tools, tooling applications, feeds, speeds, and machining practices.
• Ability to read and interpret blueprints and work from detailed part drawings and specifications.
• Proficiency with precision measuring instruments, including micrometers, calipers, and similar inspection tools.
• Ability to inspect own work, verify part conformity, and make necessary machining adjustments to meet specifications.
• Ability to perform general labor tasks associated with machining, including deburring parts, machine cleanup, and daily machine maintenance.
• Experience with manual lathe operations preferred.
• Strong attention to detail, mechanical aptitude, problem-solving ability, and commitment to quality.
• Ability to work independently and manage quick setups while maintaining production efficiency and accuracy.

PREFERRED SKILLS:

• Military background or familiarity with military command and control structures.
• Possess a working knowledge of the organizational interface of military, federal, state, and local agencies.
• Demonstrate time management, problem-solving skills, self-motivation, eagerness to learn, and attention to detail.
• Ability to efficiently react to shifting program requirements and work in a team environment.
• Effectively communicate, both orally and in writing.

SECURITY CLEARANCE:  Must be able to obtain and maintain Secret security clearance.

LOCATION: Hourly, Full Time Position, Located in Tampa, FL

* MUST FILL OUT THE ENTIRE QUESTIONNAIRE TO BE CONSIDERED FOR THE POSITION *